Make your way to extract honey

The honey from your hive, you must be able to extract the honey from the comb. To do this, you must have a honey extractor. E 'produced honey extractors on the market, the cost is usually about $ 200 to $ 300, the average cost of starting a new hive of bees. If there is a group of beekeepers in an area that sometimes pool their money together to create a honey extractor that buy shares. They are not in a greatBeekeeping environment and you do not want a few hundred dollars on a product that you want your honey extractor could just go shopping.
need, the materials are to build a honey extractor, a metal rod that is at least one meter in length and thickness of wire, two-wheeled bicycle, two pieces of wood, three feet from the barbed-wire 2-3mm, a large metal drum, the ten screws for metal rod, four 400 mm sections of 8mm threaded rod, a self-centering bearing, six bolts, and a pillowBulk storage. When you choose a large metal for your homemade honey extractor drum ensure that never used to store potentially toxic materials. The tools required to build your own include honey shaker, a drill, a welder (and preferably some experience in welding), a socket set and a saw.
The first thing to do is to remove the end of the drum, not two pools of water, which was recently opened up to the end of the hood honey.Use screws to fix the threshold of the pieces of wood at the bottom of the drum. Once the wood is available through bolts to secure the media are. After inserting the threaded rod through the center of the first bicycle wheels, bolts attach the circle to the rod about four inches from the end of the auction. At the other end of the barrel you want a thread, but the other wheel, the second wheel will rest on this mother. If the two wheels in position,want to make holes in four places around each wheel, if so, use the bars of 8 mm for the wheels lock to drill together. Use two mounting bolts. Make sure that the two inches sticking out of the bar.
When this is finished you will have a slit cut into is10mm three millimeters in depth and breadth at the end of the barrel. After this thread lock the nuts together at the end of the auction. After you think the dice are available using the welder permanently lock them in place. Connect the cable tothe spokes of the wheel base, about 5-8cm from the rim. Now you have correctly entered the basket of your honey shaker.
Take your newly designed fume hood, and put in the basket and left him on the pad cushion. Now you're going to pin a second piece of wood on the sides of the drum and the self-centering.
After drilling a screwdriver bit into the chuck, insert the feed into the slot in the slot at the top of the threaded rod.